Datasheet Correction regarding the Absolute Maximum Rating (Output Voltage)

Nov,2007

Dear Customer

  The following correction will be made to the technical datasheets in the next revision. We would therefore like to inform customers about it. If you have any questions or require any further information, please contact your local sales office.

Correction to be made

• The absolute maximum rating for the output voltage should be corrected to “-0.3 to V_DD+0.3 (V)” at all ports, as shown below.

• Before correction

Parameter	Symbol	Pins	Rating	Unit
Output Voltage	VOUT1	RESET, Tri-state Port	-0.3 to VDD+0.3	V
	VOUT2	P20, Sink Open Drain Port	-0.3 to 5.5	V

• After correction

Parameter	Symbol	Pins	Rating	Unit
Output Voltage	VOUT		-0.3 to VDD+0.3	V

• The absolute maximum rating for the output voltage should be corrected to “-0.3 to V_DD+0.3 (V)” at all ports, as shown below.

• Before correction

Parameter	Symbol	Pins	Rating	Unit
Output Voltage	VOUT1	P21, P22, Tri-state Port	-0.3 to VDD+0.3	V
	VOUT2	P20, Sink Open Drain Port	-0.3 to 5.5	V

• After correction

Parameter	Symbol	Pins	Rating	Unit
Output Voltage	VOUT		-0.3 to VDD+0.3	V

Inquiries

To Inquiries on our products.

Important Notices top

• 

• Products
  • Microcomputer
    • Important Notices
• Applications
• Company Profile
• News and Event
• Support

• Terms of Use
• Site Map
• 日本語
• 简体中文
• 繁體中文

Top of this page